FAQs
More FAQs- Will applying urethane void my manufacturer’s warranty on the floor?
- When will I be able to walk on my floors?
- How often do we need to disinfect?
It may. However, most factory warranties do not cover scratching, wear and abrasion. If your floor has reached this stage, your best option is to protect it. Many factory finishes will eventually wear out. You can most closely achieve that factory type finish by applying a thin coat of urethane. Refer to the manufacturer’s warranty.
Hard-surface floors treated with an acrylic finish can be lightly walked on within an hour after the last coat was applied. We recommend allowing the floor to dry for 24 hours before allowing heavy traffic on it.
A key consideration in determining how often you should be disinfecting is based on the traffic level in your facility. As disinfection is for infection prevention, the goal is to help to mitigate surface-to-person transmission of pathogens. If your 10,000 SF office will be occupied by 5 staff and no visitors, you can likely disinfect less frequently than that same office which might house 60 staff and consistent visitors. Additional considerations include how often multiple people may be touching the same surface as well as whether an antimicrobial surface protectant has been applied. At minimum, however, we would recommend daily disinfection of high touch surfaces. If the traffic in your facility is high, we would recommend increasing this frequency to multiple times per day. For example, common elevator lobbies in an office tower should be disinfected multiple times per day, particularly at the entrance level.